About Chris Burge | Spirit Tools Founder & Consciousness Technologist

Consciousness Assisted Technology

Consciousness Assisted Technology

Chris and Spirit Tools
Chris Burge is a visionary shaman, consciousness technologist practitioner of Consciousness Assisted Technology.
Gifted with rare paranormal-energetic perception rooted in a near-death experience at age four,
Chris developed an unparalleled ability to perceive, map, and engineer within the subtle energetic architecture of
the human field and the Earth itself.
This extraordinary capacity to bridge physical and energetic realms inspired Chris to create Spirit Tools: a proprietary system of hand-crafted light technology devices designed to elevate frequencies and support the activation of the light body.
Over the years, Chris has developed a growing series of tools, including lightblades, talismans, energy cuffs, power packs, a Miracle Light Table, and energy grounding and clearing constructs for the home.
All engineered to catalyze harmonic resonance within the human energetic field.
These instruments are not merely tools.
They are precision-built conduits for profound transformation.
Spirit Tools offers not just an experience, but an ongoing journey of empowerment.
Anchored in a philosophy of grounding, purification, and energetic balance- designed to support natural healing and light body activation for practitioners and individuals ready to operate at their highest potential.
Endorsed by luminaries including Suzy Miller and Steven Ross, and recognized by Native American shamans for his extraordinary gifts, Chris is known as a bridge between worlds and between practitioners and those they serve.
Chris has also discovered that Sedona's high-frequency vortex environment allows him to be more deeply grounded, enabling him to streamline his craft and bring greater precision to his vibrational engineering work.
Tangible Magic: The Lightblade’s Energetic Mechanics
The lightblades, talismans, power packs, salt lamp crowns and the light bed are advanced spirit tools designed to channel and broadcast specific energetic frequencies, based on their unique crystal compositions.
At the heart of each device lies a quartz crystal,
which acts as the engine, powering the tool and facilitating energy transformation.
The primary conductor of energy is a wire made from a blend of metals, such as gold, silver, platinum, and titanium or brass, silver, and copper, then spooled together to form the foundational wiring.
Auxiliary wires are grounded into the primary wire to create a closed circuit, generating a vibratory output that circulates energy through the system.
The blade band functions as the conduit for the energy current, recirculating it throughout the tool. The design, often in the shape of a figure-eight, ensures that the energy remains in a perpetual loop, flowing continuously in a balanced cycle.
When activated, the light blade achieves harmonic resonance, amplifying its vibratory output. This resonance facilitates the diffusion and grounding of energy throughout a person’s meridian system-a network of energetic pathways that regulate the flow of life force (Qi, Chi, or prana) within the body.
By addressing energetic disruptions, the tool restores the flow of energy, promoting physical balance and healing.
Key Components and Their Roles:
1. Quartz Crystal Engine
The quartz crystal serves as the primary power source of the device.
Known for its piezoelectric properties, quartz generates electricity under pressure,
which is likely harnessed to activate the tool.
The crystal’s frequency is determined by its composition, shape, and resonant qualities, which can be finely tuned to produce specific energetic effects.
2. Primary Energy Conductor (Metals)
The primary conductor consists of wires made from combinations of 24K gold,
silver, platinum, and titanium or brass, silver, and copper.
Each of these metals brings unique properties to the tool:
Copper: Excellent conductivity, facilitating the transmission of energy.
Silver: Enhances the purity and effectiveness of the energy flow due to its superior conductive abilities.
Brass: A blend of copper and zinc, contributing structural integrity and potentially influencing the tool’s vibratory frequency through the zinc content.
24K Gold, Silver, Platinum & Titanium: Opulent strength, durability, and energy-balancing properties to the device.
These metals are carefully selected for their conductive and energetic properties to ensure efficient energy transfer.
3. Grounding and Auxiliary Wires
Auxiliary wires are grounded into the primary wire to create a closed circuit,
ensuring that energy flows in a controlled, balanced manner.
Grounding stabilizes the energy, allowing it to circulate through the system without interruptions, maintaining the flow within the device and enhancing its overall effectiveness.
4. The Blade Band and Energy Recirculation
The blade band is the component responsible for carrying the energy current, acting as the physical embodiment of the lightblade. It works by recirculating the energy, creating a continuous loop.
The figure-eight design symbolizes infinite energy flow and balance, which is central to maintaining perpetual energy circulation within the device.
This constant recirculation helps amplify the tool’s effectiveness by sustaining its vibratory output over time.
5. Harmonic Resonance and Energy Diffusion
Upon activation, the light blade achieves harmonic resonance, vibrating at a frequency that aligns with the natural resonant frequency of the individual. This process is critical for healing-
the tool’s energy helps restore balance and harmony within the body’s energetic system.
By diffusing energy through the meridians, it addresses blockages and imbalances that
can manifest as physical or emotional ailments.
The resonance facilitates the smooth flow of energy throughout the body, helping to clear disruptions at the energetic level and restore equilibrium to the system.
6. Manifestation of Physical Healing
The lightblade’s primary function is to address energy imbalances by working at the vibratory level of the body’s energetic pathways. By clearing blockages in the meridian system, the tool helps restore smooth energy flow, which can have a direct impact on the physical body.
When energy is properly balanced, the body’s natural healing processes are enhanced, leading to improvements in both physical health and emotional well-being.
Summary of Key Functions and Theoretical Applications:
Power Source: The quartz crystal engine serves as the energy converter, transducing and powering the device.
Energy Conductor: Metals like copper, silver, and brass form the primary conductor,
transmitting energy through a recirculating circuit.
Energy Diffusion: The blade and harmonic resonance align the energy with the body’s meridian system,
promoting balanced energy flow.
Releasing: By addressing and clearing energetic blockages, the light blade encourages physical and emotional releasing of old energy through energetic restoration.
Two Experiences That Shaped the Work

THE LOVE SHINE LIGHT BLADE
Chris recounts being invited by a highly regarded exorcist to assist with an exceptionally difficult case. Those present described extreme behavior, including wall-crawling and blackened eyes, and believed the individual was affected by an entity.
Chris approached the situation through a different principle. Using his Love Shine Light Blade, he describes directing an intense field of love and light across the person's body rather than confronting the perceived entity through force.
According to Chris, the love frequency became incompatible with the entity's presence. He observed it leave, after which the individual returned to themselves.
LOVE DOES NOT HAVE TO FIGHT DARKNESS.
THE FIELD CAN BECOME SO COHERENT WITH LOVE THAT DARKNESS CANNOT REMAIN.
THE MIRACLE ROOM
A prominent Mount Shasta healer with approximately ten years of practice came to experience Chris's Miracle Light Table. Before she ever got onto the table, Chris says that simply entering the Miracle Room caused dark energetic forms to release from her field and immediately retrace to what he perceived as their points of origin.
No formal session had begun. For Chris, this suggested something profound:
the environment itself could become part of the technology.

The Miracle Light Table
"IT IS LIKE A CHAKRA CAR WASH."
HOW IT WORKS
A person lies on the Table while 12 Spirit Tools Power Packs are positioned to work with the energetic system. The Table is grounded through grounding sheets and an outdoor tree connection, creating a deeply grounded environment for the clearing process.
WHAT IT IS DESIGNED TO DO
The purpose is not to induce Kundalini, astral travel, or an out-of-body experience. Chris designed the Table to do almost the opposite: to help clear what he describes as energetic fragments and interference while helping the person remain grounded, embodied, and present.
MADE FOR EVERYONE
Chris says the Table attunes to the sentience and energetic capacity of the person using it. It is not reserved for advanced practitioners or people who already perceive energy. It was engineered to clear everyone’s chakras.
THE GOAL IS NOT TO SEND SOMEONE SOMEWHERE ELSE.
IT IS TO CLEAR THE INTERFERENCE SO THEY CAN COME MORE FULLY HERE.

Home

Chris and Spirit Tools

Chris Burge is a visionary shaman, consciousness technologist practitioner of Consciousness Assisted Technology.

Gifted with rare paranormal-energetic perception rooted in a near-death experience at age four,

Chris developed an unparalleled ability to perceive, map, and engineer within the subtle energetic architecture of

the human field and the Earth itself.

This extraordinary capacity to bridge physical and energetic realms inspired Chris to create Spirit Tools: a proprietary system of hand-crafted light technology devices designed to elevate frequencies and support the activation of the light body.

Over the years, Chris has developed a growing series of tools, including lightblades, talismans, energy cuffs, power packs, a Miracle Light Table, and energy grounding and clearing constructs for the home.

All engineered to catalyze harmonic resonance within the human energetic field.

These instruments are not merely tools.

They are precision-built conduits for profound transformation.

Spirit Tools offers not just an experience, but an ongoing journey of empowerment.

Anchored in a philosophy of grounding, purification, and energetic balance- designed to support natural healing and light body activation for practitioners and individuals ready to operate at their highest potential.

Endorsed by luminaries including Suzy Miller and Steven Ross, and recognized by Native American shamans for his extraordinary gifts, Chris is known as a bridge between worlds and between practitioners and those they serve.

Chris has also discovered that Sedona's high-frequency vortex environment allows him to be more deeply grounded, enabling him to streamline his craft and bring greater precision to his vibrational engineering work.

Tangible Magic: The Lightblade’s Energetic Mechanics

The lightblades, talismans, power packs, salt lamp crowns and the light bed are advanced spirit tools designed to channel and broadcast specific energetic frequencies, based on their unique crystal compositions.

At the heart of each device lies a quartz crystal,

which acts as the engine, powering the tool and facilitating energy transformation.

The primary conductor of energy is a wire made from a blend of metals, such as gold, silver, platinum, and titanium or brass, silver, and copper, then spooled together to form the foundational wiring.

Auxiliary wires are grounded into the primary wire to create a closed circuit, generating a vibratory output that circulates energy through the system.

The blade band functions as the conduit for the energy current, recirculating it throughout the tool. The design, often in the shape of a figure-eight, ensures that the energy remains in a perpetual loop, flowing continuously in a balanced cycle.

By addressing energetic disruptions, the tool restores the flow of energy, promoting physical balance and healing.

Key Components and Their Roles:

1. Quartz Crystal Engine

The quartz crystal serves as the primary power source of the device.

Known for its piezoelectric properties, quartz generates electricity under pressure,

which is likely harnessed to activate the tool.

The crystal’s frequency is determined by its composition, shape, and resonant qualities, which can be finely tuned to produce specific energetic effects.

2. Primary Energy Conductor (Metals)

The primary conductor consists of wires made from combinations of 24K gold,

silver, platinum, and titanium or brass, silver, and copper.

Each of these metals brings unique properties to the tool:

Copper: Excellent conductivity, facilitating the transmission of energy.

Silver: Enhances the purity and effectiveness of the energy flow due to its superior conductive abilities.

Brass: A blend of copper and zinc, contributing structural integrity and potentially influencing the tool’s vibratory frequency through the zinc content.

24K Gold, Silver, Platinum & Titanium: Opulent strength, durability, and energy-balancing properties to the device.

These metals are carefully selected for their conductive and energetic properties to ensure efficient energy transfer.

3. Grounding and Auxiliary Wires

Auxiliary wires are grounded into the primary wire to create a closed circuit,

ensuring that energy flows in a controlled, balanced manner.

Grounding stabilizes the energy, allowing it to circulate through the system without interruptions, maintaining the flow within the device and enhancing its overall effectiveness.

4. The Blade Band and Energy Recirculation

The blade band is the component responsible for carrying the energy current, acting as the physical embodiment of the lightblade. It works by recirculating the energy, creating a continuous loop.

The figure-eight design symbolizes infinite energy flow and balance, which is central to maintaining perpetual energy circulation within the device.

This constant recirculation helps amplify the tool’s effectiveness by sustaining its vibratory output over time.

5. Harmonic Resonance and Energy Diffusion

Upon activation, the light blade achieves harmonic resonance, vibrating at a frequency that aligns with the natural resonant frequency of the individual. This process is critical for healing-

the tool’s energy helps restore balance and harmony within the body’s energetic system.

By diffusing energy through the meridians, it addresses blockages and imbalances that

can manifest as physical or emotional ailments.

The resonance facilitates the smooth flow of energy throughout the body, helping to clear disruptions at the energetic level and restore equilibrium to the system.

6. Manifestation of Physical Healing

The lightblade’s primary function is to address energy imbalances by working at the vibratory level of the body’s energetic pathways. By clearing blockages in the meridian system, the tool helps restore smooth energy flow, which can have a direct impact on the physical body.

When energy is properly balanced, the body’s natural healing processes are enhanced, leading to improvements in both physical health and emotional well-being.

Summary of Key Functions and Theoretical Applications:

Power Source: The quartz crystal engine serves as the energy converter, transducing and powering the device.

Energy Conductor: Metals like copper, silver, and brass form the primary conductor,

transmitting energy through a recirculating circuit.

Energy Diffusion: The blade and harmonic resonance align the energy with the body’s meridian system,

promoting balanced energy flow.

Releasing: By addressing and clearing energetic blockages, the light blade encourages physical and emotional releasing of old energy through energetic restoration.

Two Experiences That Shaped the Work

Chris recounts being invited by a highly regarded exorcist to assist with an exceptionally difficult case. Those present described extreme behavior, including wall-crawling and blackened eyes, and believed the individual was affected by an entity.

Chris approached the situation through a different principle. Using his Love Shine Light Blade, he describes directing an intense field of love and light across the person's body rather than confronting the perceived entity through force.

According to Chris, the love frequency became incompatible with the entity's presence. He observed it leave, after which the individual returned to themselves.

LOVE DOES NOT HAVE TO FIGHT DARKNESS.

THE FIELD CAN BECOME SO COHERENT WITH LOVE THAT DARKNESS CANNOT REMAIN.

THE MIRACLE ROOM

No formal session had begun. For Chris, this suggested something profound:

the environment itself could become part of the technology.

The Miracle Light Table

"IT IS LIKE A CHAKRA CAR WASH."